Periodontal Bone Regeneration : Current Concepts, Recent Advances & Future Perspectives

  • Asma Kadri AMU
Keywords: Bone regeneration; Biomaterials; Bone grafts; Bone tissue engineering; Bioactive glass; Hydroxyapatite; 3D printing; Osteogenesis.

Abstract

Bone defects caused by trauma, infection, congenital abnormalities, or tumour resection remain a significant clinical challenge. Although autogenous bone grafts are considered the gold standard, their use is limited by donor-site morbidity and limited availability. Allografts and xenografts provide alternative options but have disadvantages, including immunogenicity, delayed healing, and disease transmission risks. Recent advances in biomaterials have led to the development of bioactive and biocompatible materials that enhance bone regeneration. This review summarizes the current progress in traditional grafts and emerging biomaterials, including calcium-based bioceramics, bioactive glasses, natural polymers, and synthetic polymers. It also highlights recent innovations such as ion-doped materials, composite scaffolds, and three-dimensional (3D) printing, which improve osteogenesis, angiogenesis, and scaffold integration. Despite promising preclinical and clinical outcomes, challenges related to mechanical stability, degradation behaviour, manufacturing, and regulatory approval remain. Future research should focus on multifunctional, patient-specific biomaterials with enhanced regenerative and immunomodulatory properties to improve the predictability and long-term success of bone regeneration

References

1. Y. Shen, et al., The global burden of osteoporosis, low bone mass, and its related fracture in 204 countries and territories, 1990-2019, Front. Endocrinol. 13 (2022).

2. J.R. Clements, B.B. Carpenter, J.K. Pourciau, Treating segmental bone defects: a new technique, J. Foot Ankle Surg. 47 (4) (2008) 350–356.
3. A. Stahl, Y.P. Yang, Regenerative approaches for the treatment of large bone defects, Tissue Eng Part B Rev 27 (2021) 539–547, https://doi.org/10.1089/ten. teb.2020.0281.
4. A. Oryan, S. Alidadi, A. Moshiri, N. Maffulli, Bone regenerative medicine: classic options, novel strategies, and future directions, J. Orthop. Surg. Res. 9 (2014) 18, https://doi.org/10.1186/1749-799x-9-18.
5. C. Xie, J. Ye, R. Liang, X. Yao, X. Wu, Y. Koh, W. Wei, X. Zhang, H. Ouyang, Advanced strategies of biomimetic tissue-engineered grafts for bone regeneration, Adv. Healthcare Mater. 10 (2021), https://doi.org/10.1002/adhm.202100408.
6. C. Xie, J. Ye, R. Liang, X. Yao, X. Wu, Y. Koh, W. Wei, X. Zhang, H. Ouyang, Advanced strategies of biomimetic tissue-engineered grafts for bone regeneration, Adv. Healthcare Mater. 10 (2021), https://doi.org/10.1002/adhm.202100408
7. Kim, Y. K., Kim, S. G., Byeon, J. H., Lee, H. J., Um, I. U., Lim, S. C., & Kim, S. Y. (2010). Development of a novel bone grafting material using autogenous teeth. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontics, 109(4), 496– 503. https://doi. org/10.1016/j.tripl eo.2009.10.017
8. V. Martin, A. Bettencourt, Bone regeneration: biomaterials as local delivery systems with improved osteoinductive properties, Mater Sci Eng C Mater Biol Appl 82 (2018) 363–371, https://doi.org/10.1016/j.msec.2017.04.038.
9. M.J. Dewey, B.A.C. Harley, Biomaterial design strategies to address obstacles in craniomaxillofacial bone repair, RSC Adv. 11 (2021) 17809–17827, https://doi. org/10.1039/d1ra02557k
10. Pilipchuk, S.P.; Plonka, A.B.; Monje, A.; Taut, A.D.; Lanis, A.; Kang, B.; Giannobile, W.V. Tissue Engineering for Bone Regeneration and Osseointegration in the Oral Cavity. Dent. Mater. 2015, 31, 317–338. [Google Scholar] [CrossRef] [PubMed

11. Sculean, A.; Nikolidakis, D.; Schwarz, F. Regeneration of Periodontal Tissues: Combinations of Barrier Membranes and Grafting Materials—Biological Foundation and Preclinical Evidence: A Systematic Review. J. Clin. Periodontol. 2008, 35, 106–116. [Google Scholar] [CrossRef]

12. Funda, G.; Taschieri, S.; Bruno, G.A.; Grecchi, E.; Paolo, S.; Girolamo, D.; Del Fabbro, M. Nanotechnology Scaffolds for Alveolar Bone Regeneration. Materials 2020, 13, 201. [Google Scholar] [CrossRef

13. J.M. Anderson, A. Rodriguez, D.T. Chang, Foreign body reaction to biomaterials, Semin. Immunol. 20 (2008) 86–100, https://doi.org/10.1016/j. smim.2007.11.004.
14. S. Franz, S. Rammelt, D. Scharnweber, J.C. Simon, Immune responses to implants - a review of the implications for the design of immunomodulatory biomaterials, Biomaterials 32 (2011) 6692–6709, https://doi.org/10.1016/j. Biomaterials.2011.05.078
15. Webster TJ, Ahn ES . Nanostructured biomaterials for tissue engineering bone. Adv Biochem Eng Biotechnol. 2007;103:275–308.
16. Mueller, T., Wirth, A., van Lenthe, G., Goldhahn, J., Schense, J., Jamieson, V., et al. (2010). Mechanical stability in a human radius fracture treated with a novel tissue-engineered bone substitute: a non-invasive, longitudinal assessment using high-resolution pQCT in combination with finite element analysis. J. Tissue Eng. Regenerat. Med. 5, 415–420. doi: 10.1002/term.325
17. Patwardhan, S., Shyam, A. K., Mody, R. A., Sancheti, P. K., Mehta, R., and Agrawat, H. (2013). Reconstruction of bone defects after osteomyelitis with nonvascularized fibular graft. J. Bone Joint Surg. Am. 95:e56
18. Street, J., Bao, M., deGuzman, L., Bunting, S., Peale, F., Ferrara, N., et al. (2002). Vascular endothelial growth factor stimulates bone repair by promoting angiogenesis and bone turnover. Proc. Natl. Acad. Sci.U.S.A. 99, 9656–9661. doi: 10.1073/pnas.152324099
19. Wang, W., and Yeung, K. W. K. (2017). Bone grafts and biomaterials substitutes for bone defect repair: a review. Bioactive Mater. 2, 224–247. doi: 10.1016/j. bioactmat.2017.05.00

20. P.V. Giannoudis, H. Dinopoulos, E. Tsiridis, Bone substitutes: an update, Injury 36 (3) (2005) S2

21. F. Shang, et al., Advancing application of mesenchymal stem cell-based bone tissue regeneration, in: Bioactive Materials, KeAi Communications Co, 2021, pp. 66
22. O. Cornu, Influence of freeze-drying and Irradiation on Mechanical Properties of Human Cancellous Bone: Application to Impaction Bone Grafting. Zorzi A. Bone Grafting, InTech, Croatia, 2012, pp. 41–58.
23. O. Cornu, Influence of freeze-drying and Irradiation on Mechanical Properties of Human Cancellous Bone: Application to Impaction Bone Grafting. Zorzi A. Bone Grafting, InTech, Croatia, 2012, pp. 41–58.
24. J.W.A. Fletcher, et al., Juvenile bovine bone is an appropriate surrogate for normal and reduced density human bone in biomechanical testing: a validation study, Sci. Rep. 8 (1) (2018).
25. Pape, H.C., A. Evans, and P. Kobbe, Autologous Bone Graft: Properties and Techniques. [] Burg, K.J.L., S. Porter, and J.F. Kellam, Biomaterial Developments for Bone Tissue Engineering.
26. 50)Bracey, D.N.; Cignetti, N.E.; Jinnah, A.H.; Stone, A.V.; Gyr, B.M.; Whitlock, P.W.; Scott, A.T. Bone Xenotransplantation: A Review of the History, Orthopedic Clinical Literature, and a Single-center Case Series. Xenotransplantation 2020, 27, e12600
27. M.E.V. Barreto, et al., Gelatin and bioactive glass composites for tissue engineering: a review, in: Journal of Functional Biomaterials, MDPI, 2023.
28. A.G.B. Castro, et al., Incorporation of PLLA micro-fillers for mechanical reinforcement of calcium-phosphate cement, J. Mech. Behav. Biomed. Mater. 71 (2017) 286–294.
29. N. Fukuda, et al., Fabrication of self-setting β-tricalcium phosphate granular cement, Journal of Biomedical Materials Research - Part B Applied Biomaterials 106 (2) (2018) 800–807.
30. S. Pina, J.M. Oliveira, R.L. Reis, Natural-based nanocomposites for bone tissue engineering and regenerative medicine: a review, in: Advanced Materials, Wiley- VCH Verlag, 2015, pp. 1143–1169.
31. N. Wang, et al., A review of multi-functional ceramic nanoparticles in 3D printed bone tissue engineering, in: Bioprinting, Elsevier B.V, 2021.
32. S. Xu, et al., Effects of HAp and TCP in constructing tissue engineering scaffolds for bone repair, J. Mater. Chem. B 5 (30) (2017) 6110–6118.
33. Y. Lai, et al., Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect, Biomaterials 197 (2019) 207–219.
34. Y. Wu, et al., Optimized fabrication of DLP-based 3D printing calcium phosphate ceramics with high-precision and low-defect to induce calvarial defect regeneration, Mater. Des. (2023) 233.
35. O. Dima, et al., Synthetic Composites Versus Calcium Phosphate Cements in Bone Regeneration: a Narrative Review, 2024.
36. M.N. G´omez-Cerezo, et al., Multiscale porosity in mesoporous bioglass 3D-printed scaffolds for bone regeneration, Mater. Sci. Eng. C 120 (2021).
37. A.I. Damian-Buda, I. Ünalan, A.R. Boccaccini, Combining mesoporous bioactive glass nanoparticles (MBGNs) with essential oils to tackle bacterial infection and oxidative stress for bone regeneration applications, ACS Biomater. Sci. Eng. 10 (11) (2024) 6860–6873. https://doi.org/10.1021/acsbiomaterials.4c00218.
38. L. García-Lamas, et al., Enriched mesoporous bioactive glass scaffolds as bone substitutes in critical diaphyseal bone defects in rabbits, Acta Biomater. 180 (2024) 104–114. [63] |, Y.W.Y.L.Y.Z.C.L.Y.L., S.C.B. Han, Exosome as Bioactive Nanovesicle for Diagnostic and Therapeutic Applications in Periodontitis, 2025.
39. Q. Wa, et al., Mesoporous bioactive glass-enhanced MSC-derived exosomes promote bone regeneration and immunomodulation in vitro and in vivo, Journal of Orthopaedic Translation 49 (2024) 264–282.
40. S. Chitra, et al., Impact of copper on in-vitro biomineralization, drug release efficacy and antimicrobial properties of bioactive glasses, Mater. Sci. Eng. C (2020) 109.
41. J. Jim´enez-Holguín, et al., Development and evaluation of copper-containing mesoporous bioactive glasses for bone defects therapy, Microporous Mesoporous Mater. 308 (2020) 110453–110454.
42. P. Injorhor, et al., Biodegradable polylactic acid-polyhydroxyalkanoate-based nanocomposites with bio-hydroxyapatite: Preparation and characterization, Polymers 15 (5) (2023).
43. K. Guill´en-Carvajal, et al., Chitosan, gelatin, and collagen hydrogels for bone regeneration, in: Polymers, Multidisciplinary Digital Publishing Institute (MDPI), 2023.
44. M. Ansari, Bone tissue regeneration: biology, strategies and interface studies, in: Progress in Biomaterials, Springer Science and Business Media, Deutschland GmbH, 2019, pp. 223–237.
45. M.H. Nabavi, et al., A collagen-based hydrogel containing tacrolimus for bone tissue engineering, Drug Delivery and Translational Research 10 (1) (2020) 108–121.
46. A.M. Abd El-Aziz, et al., Viscoelasticity, mechanical properties, and in vitro bioactivity of gelatin/borosilicate bioactive glass nanocomposite hydrogels as potential scaffolds for bone regeneration, Polymers 13 (12) (2021).
47. M. Ebrahimi, Porosity parameters in biomaterial science: definition, impact, and challenges in tissue engineering, in: Frontiers of Materials Science, Higher Education Press Limited Company, 2021, pp. 352–373.
48. N.R. El-Bahrawy, et al., Development of porous hydroxyapatite/PVA/gelatin/ alginate hybrid flexible scaffolds with improved mechanical properties for bone tissue engineering, Mater. Chem. Phys. 319 (2024).
49. L. Qu, et al., Metformin-loaded nanospheres-laden photocrosslinkable gelatin hydrogel for bone tissue engineering, J. Mech. Behav. Biomed. Mater.
50. S. Lian, et al., Methacrylate gelatin and platelet-rich plasma-based hydrogels promote regeneration of critical-sized bone defects, Regen. Biomater. 11 (2024).
51. X. Li, et al., Enhancing bone regeneration and immunomodulation via gelatin methacryloyl hydrogel-encapsulated exosomes from osteogenic pre-differentiated mesenchymal stem cells, J. Colloid Interface Sci. 672 (2024) 179–199.
52. X. Huang, et al., Biomaterial scaffolds in maxillofacial bone tissue engineering: a review of recent advances, in: Bioactive Materials, KeAi Communications Co, 2024, pp. 129–156
53. I.Y. Kim, et al., Chitosan and its derivatives for tissue engineering applications, Biotechnol. Adv. (2008) 1–21.
54. N.H. Radwan, et al., Chitosan-calcium phosphate composite scaffolds for control of post-operative osteomyelitis: fabrication, characterization, and in vitro–in vivo evaluation, CarbohydrPolym. 244 (2020).
55. R. Augustine, et al., Chitosan ascorbate hydrogel improves water uptake capacity and cell adhesion of electrospunpoly(epsilon-caprolactone) membranes, Int. J. Pharm. 559 (2019) 420–426.
56. A. Aguilar, et al., Application of chitosan in bone and dental engineering, in: Molecules, MDPI AG, 2019.
57. C.E. Black, et al., Cyanine nanocages activated by near-infrared light for the targeted treatment of traumatic brain injury, Front. Chem. 8 (2020).
58. G. Tang, et al., Recent advances of chitosan-based injectable hydrogels for bone and dental tissue regeneration, in: Frontiers in Bioengineering and Biotechnology, Frontiers Media S.A, 2020.
59. B. Bagheri, et al., Self-gelling electroactive hydrogels based on chitosan–aniline oligomers/agarose for neural tissue engineering with on-demand drug release, Colloids Surf. Bio interfaces (2019) 184
60. I.Y. Kim, et al., Chitosan and its derivatives for tissue engineering applications, Biotechnol. Adv. (2008) 1–21.
61. (S. Pourhajrezaei, et al., Bioactive polymers: a comprehensive review on bone grafting biomaterials, in: International Journal of Biological Macromolecules, Elsevier B.V, 2024. [205]
62. Terzopoulou, et al., Biocompatible synthetic polymers for tissue engineering purposes, Biomacromolecules 23 (5) (2022) 1841–1863. [206] F. Danhier, et al., PLGA-based nanoparticles: an overview of biomedical applications, J. Contr. Release (2012) 505–522.
63. M. Ansari, Bone tissue regeneration: biology, strategies and interface studies, in: Progress in Biomaterials, Springer Science and Business Media, Deutschland GmbH, 2019, pp. 223–237.
64. M.H. Nabavi, et al., A collagen-based hydrogel containing tacrolimus for bone tissue engineering, Drug Delivery and Translational Research 10 (1) (2020) 108–121. [91] R. Parenteau-Bareil, R. Gauvin, F. Berthod, Collagen-based biomaterials for tissue engineering applications, Materials 3 (3) (2010) 1863–1887.
65. Z. Chen, et al., 3D printing of multifunctional hydrogels, Adv. Funct. Mater. 29 (20) (2019).
66. Y. Akiyama, et al., Bone formation potential of collagen type I-based recombinant peptide particles in rat calvaria defects, Regenerative Therapy 16 (2021) 12–22.
67. Y. Zhang, et al., A zinc oxide nanowire-modified mineralized collagen scaffold promotes infectious bone regeneration, Small 20 (19) (2024).
68. Z. Zhang, et al., Neuro-Bone Tissue Engineering: Multiple Potential Translational Strategies Between Nerve and Bone, 2022
Published
2026-10-06
How to Cite
Kadri, A. (2026). Periodontal Bone Regeneration : Current Concepts, Recent Advances & Future Perspectives. UNIVERSITY JOURNAL OF DENTAL SCIENCES, 12(3). Retrieved from https://www.ujds.in/index.php/ujds/article/view/1697
Section
Periodontology / Oral Implant